Odourless, light-stable and ecological water-based putty for wood. The white version is also suitable for smoothing plaster. Formulated to minimise shrinkage on drying and to allow colours to be inter-mixable with each other to create limitless shades.

Special putty in powder form with wood flour specific for wooden surfaces, can also be used on wall supports. To be mixed with water, it is ideal for grouting wood imperfections and for reconstructing missing parts. It adheres perfectly to all surfaces. Colors resistant to light. Can be overpainted with PU, acrylic, epoxy, UV and water-based paints.

Two-component polyurethane varnish, self sealer for parquet. High performance, for professional use. Available in different gloss levels.

Catalysis ratio: 1:1

Two-component primer varnish for the treatment of parquet. It allows to realize particularly full and decorative finishes. To be completed with finishing varnish Parkettlack 2k PU

It is used with its catalyst.

Catalysis ratio: 1:1

It is a waterbased vehicle ready to use, with a special aging effect. If applied to tannin-rich woods, such as oak, it easily creates surfaces with an antique appearance. If added with water-based pastes or Waterbased mordant concentrates, they allow to obtain special color effects even on larch. Only for interiors.

It is a waxy emulsion with no solvents, designed for the protection and renewal of worn-out parquet. Its composition of natural waxes supplemented with surfactants give a pleasant wear-resistant brilliance. Ideal for protecting oil-treated and lacquered floors. Apply evenly without overlapping. Wait for it to dry completely. According to the type of finishing that needs to be revitalized, there is a matt (for 20-40 gloss matt oil/lacquer finishings) and deep matt (for zero gloss, natural effect finishings) versions of the product. Indicative yield: 60-70m2 / Lt

Standard
Cod. 0490-90
Cod. 0491-90

Opaco
Cod. 0490-30
Cod. 0491-30

Opaco profondo
Cod. 0490-10
Cod. 0491-10

It is a waterbased ready to use vehicle, with a special antique effect.
Ideal for oak, it easily creates supports with an antique appearance with particular shades of grey. It is recommended to carry out preliminary tests to verify the final result.

Special polishing wax for parquet, based on pure bees wax and carnauba. Ideal for the natural finishes of oil-treated surfaces or for the maintenance of varnished parquet. Silicon-free. It easily nourishes and protects all wood surfaces, giving a pleasant and soft veil with antistatic properties. The reusable beeswax for parquet, pigmented with stable and light-resistant colors, is ideal for the restoration of old parquet floors and for special effects.

It is a one-component polyurethane-based varnish ready for use, special as a primer-finish treatment for any wooden flooring, easy and fast. Fast drying, it is characterized by excellent workability even in industrial applications. To increase the covering of the covering, it is possible, even if not strictly necessary, to apply the Borma Parkettlack 2k primer as a preliminary layer.

Practical and easy to handle, it simply requires two AA batteries and allows correct and effective application of the Hardwax touch up sticks